DIY Blocked Drain Cleaning Methods
Most kitchen and bathroom drains will be clogged at some point. This is an unfortunate occurrence that normally happens to most homeowners. The extent of the blockage can become very expensive if a professional plumber has to be hired. The good news is that homeowners do not have to depend on outside help to get their drain cleaned. Fortunately, many basic things in the home can be used to unclog drains effortlessly and in little time. Learn about the various methods of cleaning a blocked drain.
Finding the Source of the Blockage
Locate the source of the drain blockage. The process of Leaking Taps in Sydney is quite problematic issue in residential areas, but it has solutions. Surprisingly, most cases of blocked drains can be resolved with a simple visual inspection. At times, things such as hair can get tangled in drains, therefore, causing temporary blockage. In such a case, the removal of the hair would be enough to get the drain in working condition. In cases where the source of the blockage cannot be located, more stringent steps has to be taken.
Plunging Away the Blockage
Every homeowner should always have a plunger handy for emergency situations. The next necessary step in the case of a blocked drain is to get the plunger. Place the plunger over the drain. Firmly press down on the plunger until it creates a suction between the plunger and the drain. Apply pressure to the plunger and pull it upwards. This will pull anything upwards that might be blocking the drain. Sometimes it may be difficult to clear the drain with one plunge, so repeat as often as necessary to get the source of the blockage out. Other steps may be necessary if this step doesn’t work.
The Baking Soda and Vinegar Method
The use of baking powder and white vinegar is one of the most effective method of cleaning a blocked drain. This simply cost-effective method is often overlooked, even though most people keep a box of baking soda in their refrigerator or vinegar in their kitchen cupboard.
To get started, place a pot of water and the stove, and turn the settings to medium. Allow the water to boil rapidly for few minutes. Measure a 1 cup of white vinegar and 1 cup of baking soda. The baking soda should be poured down the drain, followed by the vinegar. The baking soda and the vinegar will start to create a fizzing reaction instantly. It will gradually work to dissolve the blockage. After 20 minutes, the boiled water should be poured into the drain. As the water goes down the drain, it will wash away any remaining residue, clearing the drain.
Keep in mind that early intervention can help to prevent blockage of drains.